Powerbase - the intelligent all-round Li-ION, Li-Po, NiCd and NiMH charger and analyser for 12/24 V DC and mains operation for all areas of model sport.
Facts:
- Lipos 1-5 cells
- NiCd/NiMH 1-16 cells
- Charg. curr. up to 5 A
- double charging protection
- discharge function
The microprocessor-control multi-charger for mains and automobile operation is designed for
1-16 cell rechargeable NiCd/NiMH battery packs and 1-5 cell rechargeable Li-ION/Li-Po battery
packs. The charging current can be continuously regulated through the entire cell range from
200 mA to 5 A. The charging procedure is monitored using the delta peak for rechargeable
NiCd/NiMH battery packs and using the CCCV procedure for rechargeable Li-ION/LiPo battery
packs. An external temperature sensor monitors the rechargeable battery pack temperature.
NiCd/NiMH or Li-ION/Li-Po is selected manually and the cell count can be detected automatically
or selected manually for new unformatted cells. During the charging procedure, a straighforward
LCD display indicates the charging current, current voltage, cell count, operating mode
and type of the rechargeable battery pack. Furthermore, during the entire charging process, the
charged-in capacity is measured and displayed at the touch of a button. Using the discharge
mode, which allows rechargeable NiCd/NiMH battery packs with cell current of up to 0.9 V to
be automatically discharged, the rechargeable battery pack can be tested. Here, information,
such as the rechargeable battery pack current and discharge capacity can be queried via the
display. In addition to the visual display, various states of the charger, such as the end of charge
or rechargeable battery pack error are indicated by an acoustic alarm. An error code in the LCD
display indicates the error type, such as defect or incorrectly connected rechargeable battery
pack, incorrect cell count, etc.
German/English
Technische Daten:
Eingang: 230 V 50 Hz oder 12/24 V DC
Ausgang: 1 - 16 Zellen NiCd/NiMh (1,2 - 19,2 V DC Nennspannung)
1 - 5 Zellen LiION/LiPo (3,7 - 18,5 V DC Nennspannung)
Ladestrom: 200 mA .... 5 A stufenlos
Entladestrom: 2 A bei 1 - 8 Zellen / 1 A bei 9 - 16 Zellen
Entladespannung: 0,9 V/Zelle
Lade?berwachung:
NiCd/NiMh DeltaPeak, Sicherheitstimer 10 h, Maximalspannung, Temperatur
LiION/LiPo CCCV, Sicherheitstimer 10 h, Maximalspannung, Temperatur
Specifications:
Input : 230 V 50 Hz or 12/24 V DC
Output : 1-16 NiCd/NiMH cells 1.2-19.2 nominal V DC voltage)
1-5 Li-ION/Li-Po cells (3.7-18.5 nominal V DC voltage)
Charging current: 200 mA .... 5 A continuously
Discharging current: 2 A for 1-8 cells / 1 A for 9-16 cells
Discharging voltage: 0.9 V/cell
Charge monitoring:
NiCd/NiMH Delta peak, safety timer 10 h, maximum voltage,
temperature
Li-ION/Li-Po CCCV, safety timer 10 h, maximum voltage,
temperature
|
Car & Truck Accessories 
